Polonium electron configuration

The information on this page is ✔ fact-checked.

Polonium electron configuration
Polonium electron configuration | Image: Learnool

The polonium electron configuration, represented as [Xe] 6s2 4f14 5d10 6p4 or 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10 5p6 6s2 4f14 5d10 6p4, showcases the specific placement of electrons within the atom. This configuration can be determined through various methods, including the aufbau principle, periodic table organization, Bohr model representation, or orbital diagram visualization.

Methods

Aufbau principle

  • First, find electrons of polonium atom
Periodic table | Image: Learnool

The atomic number of polonium represents the total number of electrons of polonium. Since the atomic number of polonium is 84, the total electrons of polonium are 84.

  • Second, make a table of subshell and its maximum electrons

Calculate the maximum number of electrons each subshell can hold using the formula: 4ℓ + 2

Where, ℓ = azimuthal quantum number of the subshell

For s subshell, ℓ = 0
For p subshell, ℓ = 1
For d subshell, ℓ = 2
For f subshell, ℓ = 3

subshell max. electrons
s 2
p 6
d 10
f 14

This means that,

Each s subshell can hold maximum 2 electrons
Each p subshell can hold maximum 6 electrons
Each d subshell can hold maximum 10 electrons
Each f subshell can hold maximum 14 electrons

  • Finally, use aufbau chart and start writing electron configuration

Remember that we have a total of 84 electrons.

According to the aufbau principle, 1s subshell is filled first and then 2s, 2p, 3s… and so on.

Use 2 electrons for 1s subshell | Image: Learnool

By looking at the chart, you can see that electrons are first filled in 1s subshell. Each s-subshell can hold a maximum of 2 electrons, so we will use 2 electrons for the 1s subshell.

So the electron configuration will be 1s2. Where, 1s2 indicates that the 1s subshell has 2 electrons.

Now we have used 2 electrons in the 1s subshell, so we have a total of 84 – 2 = 82 electrons left.

Use 2 electrons for 2s subshell | Image: Learnool

Looking at the chart, after 1s subshell now comes 2s subshell. Again, each s-subshell can hold a maximum of 2 electrons, so we will use 2 electrons for the 2s subshell.

So the electron configuration will be 1s2 2s2. Where, 2s2 indicates that the 2s subshell has 2 electrons.

Again, we have used 2 electrons in the 2s subshell, so we have a total of 82 – 2 = 80 electrons left.

Use 6 electrons for 2p subshell | Image: Learnool

After 2s subshell now comes 2p subshell. Each p-subshell can hold a maximum of 6 electrons, so we will use 6 electrons for the 2p subshell.

So the electron configuration will be 1s2 2s2 2p6. Where, 2p6 indicates that the 2p subshell has 6 electrons.

Here, we have used 6 electrons in the 2p subshell, so we have a total of 80 – 6 = 74 electrons left.

Use 2 electrons for 3s subshell | Image: Learnool

After 2p subshell now comes 3s subshell. Each s-subshell can hold a maximum of 2 electrons, so we will use 2 electrons for the 3s subshell.

So the electron configuration will be 1s2 2s2 2p6 3s2. Where, 3s2 indicates that the 3s subshell has 2 electrons.

Here, we have used 2 electrons in the 3s subshell, so we have a total of 74 – 2 = 72 electrons left.

Use 6 electrons for 3p subshell | Image: Learnool

After 3s subshell now comes 3p subshell. Each p-subshell can hold a maximum of 6 electrons, so we will use 6 electrons for the 3p subshell.

So the electron configuration will be 1s2 2s2 2p6 3s2 3p6. Where, 3p6 indicates that the 3p subshell has 6 electrons.

Here, we have used 6 electrons in the 3p subshell, so we have a total of 72 – 6 = 66 electrons left.

Use 2 electrons for 4s subshell | Image: Learnool

After 3p subshell now comes 4s subshell. Each s-subshell can hold a maximum of 2 electrons, so we will use 2 electrons for the 4s subshell.

So the electron configuration will be 1s2 2s2 2p6 3s2 3p6 4s2. Where, 4s2 indicates that the 4s subshell has 2 electrons.

Here, we have used 2 electrons in the 4s subshell, so we have a total of 66 – 2 = 64 electrons left.

Use 10 electrons for 3d subshell | Image: Learnool

After 4s subshell now comes 3d subshell. Each d-subshell can hold a maximum of 10 electrons, so we will use 10 electrons for the 3d subshell.

So the electron configuration will be 1s2 2s2 2p6 3s2 3p6 4s2 3d10. Where, 3d10 indicates that the 3d subshell has 10 electrons.

Here, we have used 10 electrons in the 3d subshell, so we have a total of 64 – 10 = 54 electrons left.

Use 6 electrons for 4p subshell | Image: Learnool

After 3d subshell now comes 4p subshell. Each p-subshell can hold a maximum of 6 electrons, so we will use 6 electrons for the 4p subshell.

So the electron configuration will be 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6. Where, 4p6 indicates that the 4p subshell has 6 electrons.

Here, we have used 6 electrons in the 4p subshell, so we have a total of 54 – 6 = 48 electrons left.

Use 2 electrons for 5s subshell | Image: Learnool

After 4p subshell now comes 5s subshell. Each s-subshell can hold a maximum of 2 electrons, so we will use 2 electrons for the 5s subshell.

So the electron configuration will be 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2. Where, 5s2 indicates that the 5s subshell has 2 electrons.

Here, we have used 2 electrons in the 5s subshell, so we have a total of 48 – 2 = 46 electrons left.

Use 10 electrons for 4d subshell | Image: Learnool

After 5s subshell now comes 4d subshell. Each d-subshell can hold a maximum of 10 electrons, so we will use 10 electrons for the 4d subshell.

So the electron configuration will be 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10. Where, 4d10 indicates that the 4d subshell has 10 electrons.

Here, we have used 10 electrons in the 4d subshell, so we have a total of 46 – 10 = 36 electrons left.

Use 6 electrons for 5p subshell | Image: Learnool

After 4d subshell now comes 5p subshell. Each p-subshell can hold a maximum of 6 electrons, so we will use 6 electrons for the 5p subshell.

So the electron configuration will be 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10 5p6. Where, 5p6 indicates that the 5p subshell has 6 electrons.

Here, we have used 6 electrons in the 5p subshell, so we have a total of 36 – 6 = 30 electrons left.

Use 2 electrons for 6s subshell | Image: Learnool

After 5p subshell now comes 6s subshell. Each s-subshell can hold a maximum of 2 electrons, so we will use 2 electrons for the 6s subshell.

So the electron configuration will be 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10 5p6 6s2. Where, 6s2 indicates that the 6s subshell has 2 electrons.

Here, we have used 2 electrons in the 6s subshell, so we have a total of 30 – 2 = 28 electrons left.

Use 14 electrons for 4f subshell | Image: Learnool

After 6s subshell now comes 4f subshell. Each f-subshell can hold a maximum of 14 electrons, so we will use 14 electrons for the 4f subshell.

So the electron configuration will be 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10 5p6 6s2 4f14. Where, 4f14 indicates that the 4f subshell has 14 electrons.

Here, we have used 14 electrons in the 4f subshell, so we have a total of 28 – 14 = 14 electrons left.

Use 10 electrons for 5d subshell | Image: Learnool

After 4f subshell now comes 5d subshell. Each d-subshell can hold a maximum of 10 electrons, so we will use 10 electrons for the 5d subshell.

So the electron configuration will be 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10 5p6 6s2 4f14 5d10. Where, 5d10 indicates that the 5d subshell has 10 electrons.

Here, we have used 10 electrons in the 5d subshell, so we have a total of 14 – 10 = 4 electrons left.

Use last 4 electrons for 6p subshell | Image: Learnool

After 5d subshell now comes 6p subshell. Each p-subshell can hold a maximum of 6 electrons, but here we have only 4 electrons left, so we will use that 4 electrons for the 6p subshell.

So the electron configuration will be 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10 5p6 6s2 4f14 5d10 6p4. Where, 6p4 indicates that the 6p subshell has 4 electrons.

Therefore, the final electron configuration of polonium is 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10 5p6 6s2 4f14 5d10 6p4. And the condensed/abbreviated electron configuration of polonium is [Xe] 6s2 4f14 5d10 6p4.

Where, Xe is xenon

Periodic table

  • First, get periodic table chart with spdf notation
Periodic table blocks | Image: Learnool

The above image shows periodic table blocks.

The ‘s’ in s block represents that all s block elements have their valence electrons in s subshell. Similarly, the ‘p’ in p block represents that all p block elements have their valence electrons in p subshell. And so on for d block and f block.

  • Second, mark location of polonium on periodic table

Polonium is the p block element located in group 16 and period 6. Hence, mark the location of polonium on the periodic table as follows:

Mark location of polonium on periodic table | Image: Learnool
  • Finally, start writing electron configuration

Remember that: each s subshell can hold maximum 2 electrons, each p subshell can hold maximum 6 electrons, each d subshell can hold maximum 10 electrons, and each f subshell can hold maximum 14 electrons.

Start writing electron configuration from the very first element (i.e., hydrogen) all the way up to polonium.

Start from 1s and write till Po for full electron configuration | Image: Learnool

So the electron configuration of polonium will be 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10 5p6 6s2 4f14 5d10 6p4.

Bohr model

Polonium Bohr model | Image: Learnool

In the above image, 1 represents the 1st electron shell. Similarly, 2 represents the 2nd electron shell, 3 represents the 3rd electron shell, 4 represents the 4th electron shell, 5 represents the 5th electron shell, and 6 represents the 6th electron shell.

The 1st electron shell contains 1s subshell, the 2nd electron shell contains 2s and 2p subshells, the 3rd electron shell contains 3s, 3p, and 3d subshells, the 4th electron shell contains 4s, 4p, 4d, and 4f subshells, the 5th electron shell contains 5s, 5p, and 5d subshells, and the 6th electron shell contains 6s and 6p subshells.

We know that each s subshell can hold maximum 2 electrons, each p subshell can hold maximum 6 electrons, each d subshell can hold maximum 10 electrons, and each f subshell can hold maximum 14 electrons.

Also, we have to make sure that the electron configuration will match the order of aufbau principle (i.e., the 1s subshell is filled first and then 2s, 2p, 3s… and so on).

So the electron configuration of polonium will be 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10 5p6 6s2 4f14 5d10 6p4.

Where,

1s2 indicates that the 1s subshell has 2 electrons
2s2 indicates that the 2s subshell has 2 electrons
2p6 indicates that the 2p subshell has 6 electrons
3s2 indicates that the 3s subshell has 2 electrons
3p6 indicates that the 3p subshell has 6 electrons
4s2 indicates that the 4s subshell has 2 electrons
3d10 indicates that the 3d subshell has 10 electrons
4p6 indicates that the 4p subshell has 6 electrons
5s2 indicates that the 5s subshell has 2 electrons
4d10 indicates that the 4d subshell has 10 electrons
5p6 indicates that the 5p subshell has 6 electrons
6s2 indicates that the 6s subshell has 2 electrons
4f14 indicates that the 4f subshell has 14 electrons
5d10 indicates that the 5d subshell has 10 electrons
6p4 indicates that the 6p subshell has 4 electrons

Orbital diagram

Polonium orbital diagram | Image: Learnool

The above orbital diagram shows that the 1s subshell has 2 electrons, the 2s subshell has 2 electrons, the 2p subshell has 6 electrons, the 3s subshell has 2 electrons, the 3p subshell has 6 electrons, the 4s subshell has 2 electrons, the 3d subshell has 10 electrons, the 4p subshell has 6 electrons, the 5s subshell has 2 electrons, the 4d subshell has 10 electrons, the 5p subshell has 6 electrons, the 6s subshell has 2 electrons, the 4f subshell has 14 electrons, the 5d subshell has 10 electrons, and the 6p subshell has 4 electrons.

So the electron configuration of polonium will be 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10 5p6 6s2 4f14 5d10 6p4.

Next: Livermorium electron configuration

Related

More topics

External links

Deep

Learnool.com was founded by Deep Rana, who is a mechanical engineer by profession and a blogger by passion. He has a good conceptual knowledge on different educational topics and he provides the same on this website. He loves to learn something new everyday and believes that the best utilization of free time is developing a new skill.

Leave a Comment